Tuesday, August 20, 2013

empiriKit sensor units, 3D printed cases & more

Here at empiriKit we are working on the preparations for our Danish high school pilot trials starting in the autumn. Freescale kindly sponsored us with a set of FRDM-KL25Z boards that we are using as sensor input units for some of the science experiments.

The Freescale FRDM-KL25Z is a great little board with many built-in features:
  • 3D accelerometer
  • RGB light emitting diode
  • touch sensor
  • can be battery powered from a CR2032 (3V coin cell battery)
To make it easy to use for classroom experiments, we designed a plastic case using Autodesk Inventor Fusion, a 3D design program. After a couple of quick iterations we created a box that is working well.

This picture shows the completed plastic case, including the FRDM-KL25Z board:


The students need to be able to run experiments disconnected from the Raspberry Pi that we use as a host computer. In order to make that possible we mounted a coin cell battery holder on the bottom of the FRDM-KL25Z board (it is already prepared for that), a protection diode and a power switch.


We designed it all to be as compact as possible, at the same time keeping it versatile and easy to use. On the top cover of the case we made a light guide to allow use of the RGB light emitting diode in the experiments. We also left the touch area accessible in the design.

Putting it all together inside the plastic case looks like this:


And with the back plate screwed on it looks like this (the touch sensor area is the accessible part of the FRDM-KL25Z board):


Right now we are writing software and developing the science experiments for the school pilot. More on the embedded software as well as the Raspberry Pi software later.

16 comments:

  1. Cheap charge plastic printing can fit into accessories effortlessly. You will find this models with internet vendors, novelty, as well as other area of expertise stores.

    ReplyDelete
  2. Good job, man! If you’re starting to experiment with prototyping, you can make profits out of it. Just like us, we accept customized and personalized gadget cases online. Often times, we run out of this PLA filament due to its high demand.

    ReplyDelete
  3. Its wonderful blog really very nice site and blog facility.every title is very nice and very fatastic concept. Thanks for sharing the information.

    ReplyDelete
  4. Computers themselves, and software yet to be developed, will revolutionize the way we learn.

    ReplyDelete
  5. Nice Post keep continue your work really appreciating work great post and thanks for sharing informative post.

    Visit: GED Online Diploma

    ReplyDelete
  6. This blog is very useful for me, i really enjoyed it. keukenblad graniet

    ReplyDelete
  7. I'm looking for good news and ideas. This is a good give ,Keep up the good work! keukenblad composiet

    ReplyDelete
  8. I really enjoyed reading this post, I always appreciate topics like this being discussed to us. Thanks for sharing.keukenblad composiet

    ReplyDelete
  9. Well, very good post with informative information. I really appreciate the fact that you approach these topics from a stand point of knowledge and information. This is the first time, I visited at your site and became your fan. You are bookmarked. Please keep on posting.
    badgarnituur

    ReplyDelete
  10. I have extremely enjoyed reading your website posts. Any method i will be subscribing to your feed and that i hope you post once more shortly.

    Visit : Online HighSchool Diploma

    ReplyDelete
  11. I like your site and content. thanks for sharing the information keep updating, looking forward for more posts. Thanks
    website conversion strategies

    ReplyDelete
  12. Great website and good content. thanks for sharing the information, please keep updating, looking forward for more recipes
    rinta teippi

    ReplyDelete
  13. This is a great inspiring article. I am pretty much pleased with your good work. You put really very helpful information. Keep it up. Keep blogging. Looking to reading your next post.
    keramiek tafelblad

    ReplyDelete
  14. Great website and good content. thanks for sharing the information, please keep updating, looking forward for more recipes
    plastry podnoszace biust

    ReplyDelete
  15. This is very nice blog because information provided here through the article and the pictures are very effective. Because sometimes words cannot explain the things that pictures can and here the words and pictures both are expressing the things in balance.
    opbouwspots

    ReplyDelete
  16. If you need a rapid 3D printing job that is not too detailed, they should be able to get that prototype to you overnight. http://www.3dprinterhub.co.uk

    ReplyDelete